How to maintain and clean a semi-built washbasin?

How to maintain and clean a semi-built washbasin?

Second-in washbasin purchasing knowledge

1. Check the quality of materials by looking at the eyes and touching hands

Most of semi-embedded washbasin are ceramic washbasins. When choosing a ceramic washbasin, the important reference indicators are glaze finish, variation and water absorption of ceramics.

Products with high finish are pure colors, not easy to hang, easy to clean, and good self-cleaning. When determining, you can choose to carefully observe the reflection of the product's surface from the side. It is better to have no fine sand holes and pits on the surface, or there are few sand holes and pits on it. You can also gently stroke the surface with your hands, and feel very flat and delicate.

Products with high brightness index adopt high-quality glaze materials and very good glazing technology, which reflects light evenly, thereby making the visual effect good. Sanitary ceramics with water absorption rate below 3% are high-end ceramics. For example, mid-to-high-end brands such as Koma, Kohler, and Jishido are all less than 0.5%.

2. Consider the space size

The semi-buckle does not occupy too much sanitary space, but the straight line distance between the outer edges of the basin and the opposite side must not be less than 70 cm. Maintenance of semi-built washbasin:

While cleaning the washbasin as described above, try to ventilate and dry the bathroom, so as to prevent the silicone or glass glue from turning black and ensure the stability of the washbasin. Cleaning of semi-built washbasins

Ceramic washbasins can easily accumulate when used for a long time. You can use sliced ​​lemons to wash the surface of the undercounter basin and wait for a minute and then rinse them with clean water to become bright. If the stain is stubborn, pour it into a safe bleaching water in the glass bottle and wash it for about 20 minutes, then wash it with a towel or sponge, and then wash it with clean water.

The silicone or glass glue at the interface between the basin and the countertop will become moldy and black after being used for a long time. At this time, you can only use a putty knife and a utility knife to remove it. After cleaning and drying, it is best to buy the silicone that is specifically designed for kitchen and bathroom.