Tips for cleaning shower head blockage

Tips for cleaning shower head blockage

Lubricant: If the metal of the shower head rusts causes serious clogging, then use WD-40 rust removal and rust prevention lubricant. This rust-removing lubricant can have very good affinity and permeability with metals. The rust layer and the metal layer can be separated. Make the rusted part and the metal contact surface and leave a protective film. Let the shower never be stainless. If the shower at your home is not made of stainless steel, this method may be used.

Soak in vinegar: If your shower head has been blocked for a long time, and a large number of holes are blocked. Then using a needle to pierce one by one is obviously not very obvious. In this case, it is recommended that you use acidification and dust removal method to solve the problem of shower blockage. You need to prepare some white vinegar, pour the vinegar into a basin so that the shower head can be submerged. After soaking vinegar for about ten minutes, you can remove the scale in the shower head.

Use a needle: If the showerhead in your home is blocked by some small holes, then release the water first and see which holes are blocked by the bottom. Then you have to turn on the shower head of the shower and see that there are many small holes on the shower head, which looks like a shower head. This is where the water comes out. Then we will prepare a needle first, and then use the needle to pierce the impurities in the hole without water. This method is the most direct, but be careful to stab the shower hole.

What to do if the shower head is blocked?

After the shower head is used for a period of time for a long time, it will cause blockage. This is very natural. This does not mean that the shower head is broken. Don’t worry, you don’t have to buy a new one at all. If the scale is generated after long-term water release, you only need to disassemble and clean the shower head.

Many people may find it troublesome to remove and clean the shower head. In fact, the operation is very simple. It does not require you to completely disassemble the shower head into pieces, but mainly let you clean the shower head.

The main raw material for cleaning the shower head is white vinegar, which is also a material that the family has. After we remove the shower, we put it in a small basin filled with white vinegar and soak it for about two hours. After soaking, brush it with a toothbrush, and then clean it with clean water. If there is hard water sediment, scrub it with lemon slices.

When cleaning the shower head, you should pay special attention not to use strong acid (it is best to use white vinegar) to avoid corrosion on the shower surface. To ensure that the nozzle is not blocked, we should clean the shower head every six months or less, so that you no longer have to worry about the sudden blockage of the nozzle during bathing, which will affect your mood for bathing.

In order to ensure the applicable life of the shower head, it is best not to be directly under the bathroom heater when installing it, and it is best to be more than 60cm away from the bathroom heater. It is often used to stick a little flour to wipe the shower surface with a soft cloth to make it still look new.